e-handle

[e=electronic-handle] electrical handle with max. 4 switches allocatable
Product benefits:

  • due to the compact, modular construction and functional design, the e-handle can be flexibly adapted to nearly any application
  • ergonomic handle design enables operation without tiring
  • all around arranged LED status spots, green, yellow and red
  • rotary switch thumb operated e.g. for direction of rotation
  • cable connection pluggable directly at the handle housing
  • attachement e-handle with ball/without ball
  • optional: with flange connection
  • optional: up to 4 switches allocatable
  • optional: presence check for operator hand
    The operator hand (without glove) will be recognize by at least 3 sensor fields at the shell surface of the handle and switch the respective digital Output. This equipment feature is usable for saftey-related parts until Plr ≤ b in accordance ISO 13849-1.
  • optional: hand lever for manual remote control of mechanical indexing

Technical properties:

  • temperature range 5°-60°C
  • weight approx. 500g
  • operating voltage 12V–30V
  • operating current 100mA
  • load current max. 100mA for each output
  • ESD-capable
  • input and output signals 24V DC with 24V supply
  • all signals at the e-handle are allocated via separate pins exception: contol yellow LED via pin allocation green and red
  • standard configuration: lever-, axial-, and radial button contact type normally open
  • electrical life time >10,000,000 switch cycles
  • mechanical life time > 10,000,000 switch cycles
  • protection class: IP54
  • optional: contact type potential-free changeover contact for lever switch and axial button, e.g. for safety two-hand operations

Commercial data:

  • customs tariff number: 85365019
  • country of origin: Germany

Configuration Options


Lever Switch

item no. variant
e-handle
code lever-
switch 1
two-hand-
safety-
operation
axial-
button 2
two-hand-
safety-
operation
presence-
check
radial-
button 3
radial-
button 4
H/A with D
shifted in series
H Z A Z C R R SD
71862 Lever Switch EHHRR - - - - -
71864 EHHCRR - - - -
68182 EHHZRR - - - -

Notice: equipment features are displayed red

Axial button

item no. variant
e-handle
code lever-
switch 1
two-hand-
safety-
operation
axial-
button 2
two-hand-
safety-
operation
presence-
check
radial-
button 3
radial-
button 4
H/A with D
shifted in series
H Z A Z C R R SD
71865 Axial Button EHARR - - - - -
71866 EHACRR - - - -
68183 EHAZRR - - - -

Notice: equipment features are displayed red


Lever- and axial button

item no. variant
e-handle
code lever-
switch 1
two-hand-
safety-
operation
axial-
button 2
two-hand-
safety-
operation
presence-
check
radial-
button 3
radial-
button 4
H/A with D
shifted in series
H Z A Z C R R SD
71870 Lever- and Axial Button EHHARR - - - -
68184 - - - -
71868 EHHACRR - - -

Notice: equipment features are displayed red

Special feature SD variant:
The SD version of the e-handle series is required if the operating handle is connected directly to a Bosch-Rexroth screwdriver controller via the 24 V I/O interface.
By means of a special circuit (start signal connected in series with rotary switch), the operating handle with the corresponding functions can also be used in this case. See wiring diagrams of the SD variants.
If the start enable and direction preselection of the e-handle is connected to a superordinate PLC and then connected to the Bosch Rexroth controller, no SD variant is required.


H/A-button with rotary switch shifted in series

item no. variant
e-handle
code lever-
switch 1
two-hand-
safety-
operation
axial-
button 2
two-hand-
safety-
operation
presence-
check
radial-
button 3
radial-
button 4
H/A with D
shifted in series
H Z A Z C R R SD
71875 Button with rotary
switch shifted in series
EHHRRSD - - - -
71876 EHHCRRSD - - -
71878 EHARRSD - - - -
71879 EHACRRSD - - -

Notice: equipment features are displayed red

Code: EHHRRSD ANr. 71875

Code: EHHCRRSD ANr. 71876

Code: EHARRSD ANr. 71878

Code: EHACRRSD ANr. 71879